manualshive.com logo in svg

Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion, Руководство по настройке, Страница: 524 / 742

Поделиться
Скачать
Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion Скачать руководство пользователя страница 524

 

23-2

Catalyst 6500 Series Switch and Cisco 7600 Series Router Firewall Services Module Configuration Guide using ASDM

OL-20748-01

Chapter 23      Configuring Management Access

  Allowing SSH Access

To configure Telnet access to the FWSM, perform the following steps:

Step 1

To identify the IP addresses from which the FWSM accepts connections, enter the following command 
for each address or subnet:

hostname(config)# 

telnet

 

source_IP_address

 

mask

 

source_interface

If there is only one interface, you can configure Telnet to access that interface as long as the interface 
has a security level of 100.

Step 2

(Optional) To set the duration for how long a Telnet session can be idle before the FWSM disconnects 
the session, enter the following command:

hostname(config)# 

telnet timeout 

minutes

Set the timeout from 1 to 1440 minutes. The default is 5 minutes. The default duration is too short in 
most cases and should be increased until all pre-production testing and troubleshooting has been 
completed.

For example, to let a host on the inside interface with an address of 192.168.1.2 access the FWSM, enter 
the following command:

hostname(config)# 

telnet 192.168.1.2 255.255.255.255 inside

hostname(config)# 

telnet timeout 30

To allow all users on the 192.168.3.0 network to access the FWSM on the inside interface, enter the 
following command:

hostname(config)# 

telnet 192.168.3.0 255.255.255.0 inside

Allowing SSH Access

The FWSM allows SSH connections to the FWSM for management purposes. The FWSM allows a 
maximum of 5 concurrent SSH connections per context, if available, with a maximum of 100 
connections divided between all contexts. You can control the number of SSH sessions allowed per 
context using resource classes. (See the 

“Configuring a Class” section on page 4-24

.) In admin context 

only, you can have up to 15 Telnet and 15 SSH sessions concurrently.

Note

Please note that if you have two or more concurrent Telnet or SSH sessions and one of the sessions is at 
the 

More

 prompt, the other sessions may hang until the 

More

 prompt is dismissed. To disable the 

More

 

prompt and avoid this situation, enter the

 pager lines 0

 command. 

SSH is an application running on top of a reliable transport layer, such as TCP/IP, that provides strong 
authentication and encryption capabilities. The FWSM supports the SSH remote shell functionality 
provided in SSH Versions 1 and 2 and supports DES and 3DES ciphers.

Note

XML management over SSL and SSH are not supported.

This section includes the following topics:

•

Configuring SSH Access, page 23-3

•

Using an SSH Client, page 23-3

Содержание 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion







































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов