Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion Скачать руководство пользователя страница 210 | Manualshive

Страница: 210 / 742

Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion Скачать руководство пользователя страница 210

11-6

Catalyst 6500 Series Switch and Cisco 7600 Series Router Firewall Services Module Configuration Guide using ASDM

OL-20748-01

Chapter 11 Configuring AAA Servers and the Local Database

AAA Server and Local Database Support

Note

NT servers have a maximum length of 14 characters for user passwords. Longer passwords are truncated.
This is a limitation of NTLM Version 1.

Kerberos Server Support

The FWSM can use Kerberos servers for VPN-based management connections. When a user attempts to
establish VPN access, and the traffic matches an authentication statement, the FWSM consults the
Kerberos server for user authentication and grants or denies user access based on the response from the
server.

The FWSM supports 3DES, DES, and RC4 encryption types.

Note

The FWSM does not support changing user passwords during tunnel negotiation. To avoid this situation
happening inadvertently, disable password expiration on the Kerberos/Active Directory server for users
connecting to the FWSM.

LDAP Server Support

The FWSM can use LDAP servers for authorization of VPN-based management connections. When user
authentication for VPN access has succeeded and the applicable tunnel-group record specifies an LDAP
authorization server group, the FWSM queries the LDAP server and applies to the VPN session the
authorizations it receives.

Local Database Support

The FWSM maintains a local database that you can populate with user profiles.

This section contains the following topics:

•

User Profiles, page 11-6

•

Fallback Support, page 11-6

User Profiles

User profiles contain, at a minimum, a username. Typically, a password is assigned to each username,
although passwords are optional.

The

username attributes

command enables you to enter the username mode. In this mode, you can add

other information to a specific user profile. The information you can add includes VPN-related
attributes, such as a VPN session timeout value.

Fallback Support

With the exception of fallback for network access authentication, the local database can act as a fallback
method for the functions in

Table 11-1

. This behavior is designed to help you prevent accidental lockout

from the FWSM.

«
...
208
209
210
211
212
...
»

Содержание 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion







































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов