manualshive.com logo in svg

Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion, Руководство по настройке, Страница: 555 / 742

Поделиться
Скачать
Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion Скачать руководство пользователя страница 555

 

24-9

Catalyst 6500 Series Switch and Cisco 7600 Series Router Firewall Services Module Configuration Guide using ASDM

OL-20748-01

Chapter 24      Managing Software, Licenses, and Configurations

  Upgrading Failover Pairs

Where 

-v

 is for verbose, and if 

-pw

 is not specified, you will be prompted for a password.

For example, to copy ASDM from a TFTP server, enter:

hostname# 

copy tftp://209.165.200.226/cisco/asdm.bin flash:asdm

To copy to the ASDM from an HTTPS server, enter:

hostname# 

copy http://admin:[email protected]/adsm/asdm.bin flash:asdm

Upgrading Failover Pairs

The two units in a failover configuration should have the same major (first number), minor (second 
number), and maintenance (third number) software version.

However, you can have different 

maintenance

 versions of the software running on each unit and still 

maintain failover support. You can upgrade from any maintenance release to any other maintenance 
release within a minor release. For example, you can upgrade from 3.1(1) to 3.1(3) without first 
installing the maintenance releases in between.

To ensure long-term compatibility and stability, we recommend upgrading both units to the same version 
as soon as possible.

The FWSM does not support upgrading from between major or minor releases, for example, from 2.3 to 
3.1, without downtime.

Note

To upgrade failover pairs from the maintenance partition, see the 

“Installing Application Software from 

the Maintenance Partition” section on page 24-5

.

This section includes the following topics:

•

Upgrading Failover Pairs to a New Maintenance Release, page 24-9

•

Upgrading Failover Pairs to a New Minor or Major Release, page 24-11

Upgrading Failover Pairs to a New Maintenance Release

You can upgrade from any maintenance release to any other maintenance release within a minor release 
without downtime.

For example, you can upgrade from 3.1(1) to 3.1(3) without first installing the maintenance releases in 
between.

This section includes the following topics:

•

Upgrading an Active/Standby Failover Pair to a New Maintenance Release, page 24-10

•

Upgrading an Active/Active Failover Pair to a New Maintenance Release, page 24-10

Содержание 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion







































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов