manualshive.com logo in svg

Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion, Руководство по настройке, Страница: 251 / 742

Поделиться
Скачать
Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion Скачать руководство пользователя страница 251

 

13-25

Catalyst 6500 Series Switch and Cisco 7600 Series Router Firewall Services Module Configuration Guide using ASDM

OL-20748-01

Chapter 13      Identifying Traffic with Access Lists

  Logging Access List Activity

The following is an example of a weekly periodic time range from 8:00 a.m. to 6:00 p.m on weekdays.:

hostname(config)# 

time-range workinghours

hostname(config-time-range)# 

periodic weekdays 8:00 to 18:00

Applying the Time Range to an ACE

To apply the time range to an ACE, enter the following command:

hostname(config)# 

access-list

 access_list_name 

[

extended

]

 {

deny

| 

permit

}...

[

time-range

 

name

]

See the 

“Adding an Extended Access List” section on page 13-6

 for complete 

access-list 

command 

syntax.

Note

If you also enable logging for the ACE, use the 

log

 keyword before the 

time-range

 keyword. If you 

disable the ACE using the 

inactive

 keyword, use the 

inactive

 keyword as the last keyword.

The following example binds an access list named “Sales” to a time range named “New_York_Minute.”

hostname(config)# 

access-list Sales line 1 extended deny tcp host 209.165.200.225 host 

209.165.201.1 time-range New_York_Minute

Logging Access List Activity

This section describes how to configure access list logging for extended access lists and Webtype access 
lists.

This section includes the following topics:

•

Access List Logging Overview, page 13-25

•

Configuring Logging for an ACE, page 13-26

•

Managing Deny Flows, page 13-27

Access List Logging Overview

By default, when traffic is denied by an extended ACE, the FWSM generates system log message 106023 
for each denied packet, in the following form:

%XXX-106023: Deny 

protocol

 src [

interface_name

:

source_address

/

source_port

] dst 

interface_name

:

dest_address

/

dest_port

 [type {

string

}, code {

code

}] by access_group 

acl_id

If the FWSM is attacked, the number of system log messages for denied packets can be very large. We 
recommend that you instead enable logging using system log message 106100, which provides statistics 
for each ACE and lets you limit the number of system log messages produced. Alternatively, you can 
disable all logging.

Содержание 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion







































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов