manualshive.com logo in svg

Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion, Руководство по настройке, Страница: 39 / 742

Поделиться
Скачать
Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion Скачать руководство пользователя страница 39

 

1-3

Catalyst 6500 Series Switch and Cisco 7600 Series Router Firewall Services Module Configuration Guide using ASDM

OL-20748-01

Chapter 1      Introduction to the Firewall Services Module

  Security Policy Overview

Security Policy Overview

A security policy determines which traffic is allowed to pass through the firewall to access another 
network. The FWSM does not allow any traffic to pass through unless explicitly allowed by an access 
list. You can apply actions to traffic to customize the security policy. This section discusses some 
commonly-used features; not all features are listed here. This section includes the following topics:

•

Permitting or Denying Traffic with Access Lists, page 1-4

•

Applying NAT, page 1-4

•

Protecting from IP Fragments, page 1-4

Turning on/off names in 
Syslog messages

This feature enables users to choose whether or not to apply name translation while generating 
syslogs to the console, syslog server, and FTP syslog server.

The following command was introduced: 

logging names

.

Shared Management 
Interface in Transparent 
Mode

You can now add a management VLAN that is not part of any bridge group. This VLAN is 
especially useful in multiple context mode where you can share a single management VLAN across 
multiple contexts.

The following command was introduced for transparent mode: 

management-only

Teardown Syslog 
Enhancement

New syslogs were added for when a connection is torn down.

The following syslog messages were introduced: 302030 through 33.

SNMP Buffer 
enhancement

With this enhancement, SNMP requests will be handled more efficiently, so that the allocated 
blocks for SNMP are freed up quickly, thus leaving enough blocks for other processes.

No commands were modified.

Troubleshooting Features

Crashinfo enhancement

The crashinfo enhancement improves the reliability of generating crash information.

No commands were modified.

Table 1-1

New Features for FWSM Version 4.1(1) (continued)

Feature

Description

Содержание 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion







































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов