manualshive.com logo in svg

Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion, Руководство по настройке, Страница: 278 / 742

Поделиться
Скачать
Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion Скачать руководство пользователя страница 278

 

14-24

Catalyst 6500 Series Switch and Cisco 7600 Series Router Firewall Services Module Configuration Guide using ASDM

OL-20748-01

Chapter 14      Configuring Failover

  Configuring Failover

Step 2

(Optional) Designate this unit as the secondary unit:

hostname(config)# 

failover lan unit secondary

Note

This step is optional because by default units are designated as secondary unless previously 
configured.

Step 3

(Optional) Specify different hostnames for the primary and secondary FWSMs to replace the default 
hostname “FWSM” that is assigned to both units. 

hostname(config)# 

hostname

 

primary-hostname

hostname(config)# 

hostname

 

secondary

 

secondary-hostname

Step 4

Enable failover:

hostname(config)# 

failover

After you enable failover, the active unit sends the configuration in running memory to the standby unit. 
As the configuration synchronizes, the messages “Beginning configuration replication: Sending to mate” 
and “End Configuration Replication to mate” appear on the active unit console.

Step 5

After the running configuration has completed replication, save the configuration to Flash memory:

hostname(config)#

 write memory

Configuring Optional Active/Standby Failover Settings

You can configure the following optional Active/Standby failover setting when you are initially 
configuring failover or after failover has already been configured. Unless otherwise noted, the 
commands should be entered on the active unit.

This section includes the following topics:

•

Configuring Failover Preemption, page 14-24

•

Enabling HTTP Replication with Stateful Failover, page 14-25

•

Configuring Interface and Unit Poll Times, page 14-25

•

Configuring Failover Criteria, page 14-25

Configuring Failover Preemption

When the primary unit in an Active/Standby failover configuration fails, or if the secondary unit boots 
before the primary unit, the secondary, standby unit becomes active. When the failover condition is 
resolved on the primary unit, it boots to the standby state by default and the secondary unit remains in 
the active state.

You can use the

 failover preempt

 command to cause the primary unit to become the active unit 

automatically after a specified amount of time. Enter the following command to configure preemption 
for the primary unit:

hostname(config)# 

failover preempt 

[

delay

]

The 

delay

 is the wait time, in seconds, before the secondary unit is preempted. Valid values are from 1 

to 1200 seconds. If the 

delay

 is not specified, there is no delay.

When the primary unit becomes active, the secondary unit enters the standby state.

Содержание 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion







































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов