manualshive.com logo in svg

Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion, Руководство по настройке, Страница: 342 / 742

Поделиться
Скачать
Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion Скачать руководство пользователя страница 342

 

16-38

Catalyst 6500 Series Switch and Cisco 7600 Series Router Firewall Services Module Configuration Guide using ASDM

OL-20748-01

Chapter 16      Configuring NAT

  NAT Examples

Overlapping Networks

In 

Figure 16-27

, the FWSM connects two private networks with overlapping address ranges.

Figure 16-27

Using Outside NAT with Overlapping Networks

Two networks use an overlapping address space (192.168.100.0/24), but hosts on each network must 
communicate (as allowed by access lists). Without NAT, when a host on the inside network tries to access 
a host on the overlapping DMZ network, the packet never makes it past the FWSM, which sees the packet 
as having a destination address on the inside network. Moreover, if the destination address is being used 
by another host on the inside network, that host receives the packet.

To solve this problem, use NAT to provide non-overlapping addresses. If you want to allow access in 
both directions, use static NAT for both networks. If you only want to allow the inside interface to access 
hosts on the DMZ, then you can use dynamic NAT for the inside addresses, and static NAT for the DMZ 
addresses you want to access. This example shows static NAT.

To configure static NAT for these two interfaces, perform the following steps. The 10.1.1.0/24 network 
on the DMZ is not translated.

Step 1

Translate

 

192.168.100.0/24 on the inside to 10.1.2.0 /24 when it accesses the DMZ by entering the 

following command:

hostname(config)# 

static (inside,dmz) 10.1.2.0 192.168.100.0 netmask 255.255.255.0

Step 2

Translate

 

the 192.168.100.0/24 network on the DMZ to 10.1.3.0/24 when it accesses the inside by 

entering the following command:

hostname(config)# 

static (dmz,inside) 10.1.3.0 192.168.100.0 netmask 255.255.255.0

Step 3

Configure the following static routes so that traffic to the DMZ network can be routed correctly by the 
FWSM:

hostname(config)# 

route dmz 192.168.100.128 255.255.255.128 10.1.1.2 1

hostname(config)# 

route dmz 192.168.100.0 255.255.255.128 10.1.1.2 1

192.168.100.2

inside
192.168.100.0/24

outside

10.1.1.2

192.168.100.1

192.168.100.2

dmz

192.168.100.0/24

192.168.100.3

10.1.1.1

132931

192.168.100.3

FWSM

Содержание 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion







































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов