manualshive.com logo in svg

Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion, Руководство по настройке, Страница: 467 / 742

Поделиться
Скачать
Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion Скачать руководство пользователя страница 467

 

22-51

Catalyst 6500 Series Switch and Cisco 7600 Series Router Firewall Services Module Configuration Guide using ASDM

OL-20748-01

Chapter 22      Applying Application Layer Protocol Inspection

  H.323 Inspection

Enabling and Configuring H.323 Inspection

H.323 inspection is enabled by default.

To enable H.323 inspection, including the optional use of an H.225 map, perform the following steps:

Step 1

To define an access list with ACEs that identify the ports required for H.323 traffic, enter the following 
command for each ACE:

hostname(config)# 

access-list 

acl-name

 permit

 {

udp

 | 

tcp

} 

any any eq 

port

where 

acl-name

 is the name you assign to the access list and 

port

 is the H.323 port that the ACE 

identifies.

The standard ports are UDP ports 1718 and 1719 and TCP port 1720.

Step 2

Create a class map or modify an existing class map to identify H.323 traffic. Use the 

class-map

 

command to do so, as follows.

hostname(config)# 

class-map 

class_map_name

hostname(config-cmap)#

where 

class_map_name

 is the name of the traffic class. When you enter the 

class-map 

command, the 

CLI enters class map configuration mode.

Step 3

Use a 

match access-list

 command to identify H.323 traffic with the access list you created in 

Step 1

.

hostname(config-cmap)# 

match access-list 

acl-name

Step 4

(Optional) If required by your network topology, configure an H.225 map. For more information about 
whether your network requires an H.225 map, see the 

“Topologies Requiring H.225 Configuration” 

section on page 22-50

. To create and configure an H.225 map, perform the following steps.

a.

Create an H.225 map.

hostname(config)# 

h225-map 

map_name

hostname(config-h225-map)#

The system enters H.225 map configuration mode and the CLI prompt changes accordingly.

b.

Identify an HSI group. To do so, use the 

hsi-group

 command, as follows.

hostname(config-h225-map)# 

hsi-group 

group_ID

hostname(config-h225-map-hsi-grp)#

where 

group_ID

 is a number, from 0 to 2147483647, that identifies the HSI group.

Table 22-5

H.225 Configuration Commands

Command

Configuration mode

Description

hsi-group

H.225 map 
configuration mode 

Defines an HSI group and enables HSI group configuration 
mode. Each HSI group can contain a maximum of ten 
endpoints.

hsi

HSI group 
configuration mode

Identifies the HSI.

endpoint

HSI group 
configuration mode

Identifies one or more endpoints within the HSI group.

Содержание 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion







































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов