manualshive.com logo in svg

Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion, Руководство по настройке, Страница: 406 / 742

Поделиться
Скачать
Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion Скачать руководство пользователя страница 406

 

21-6

Catalyst 6500 Series Switch and Cisco 7600 Series Router Firewall Services Module Configuration Guide using ASDM

OL-20748-01

Chapter 21      Configuring Advanced Connection Features

  Permitting or Denying Application Types with PISA Integration

After the FWSM receives the packet and acts on the information, it strips the GRE encapsulation from 
the packet.

When you configure the FWSM to deny traffic based on the PISA encapsulation, for the VLAN on which 
that traffic resides, the PISA encapsulates all traffic (including traffic that you did not specify for denial).

The GRE encapsulation increases the packet size slightly, so you should increase the MTU between the 
PISA and the FWSM according to the 

“Changing the MTU on the Switch to Support Longer Packet 

Length” section on page 21-8

.

The GRE encapsulation causes a slight performance impact for PISA traffic sent to the FWSM.

Failover Support

Failover of the PISA is independent of failover of the FWSM. If you have Stateful Failover on the 
FWSM, then the session information is maintained across the failover. 

Configuring the FWSM to Deny PISA Traffic

To identify traffic that you want to deny using PISA tagging, perform the following steps:

Step 1

To identify the traffic that you want to deny based on the application type, add a class map using the 

class-map

 command. See the 

“Identifying Traffic (Layer 3/4 Class Map)” section on page 20-4

 for more 

information.

For example, you can match an access list:

hostname(config)# 

access list BAD_APPS extended

 

permit any 10.1.1.1 255.255.255.255

hostname(config)# 

class-map denied_apps

hostname(config-cmap)# 

match access-list BAD_APPS

Step 2

To add or edit a policy map that sets the actions to take with the class map traffic, enter the following 
commands:

hostname(config)# 

policy-map

 

name

hostname(config-pmap)# 

class

 

class_map_name

hostname(config-pmap-c)#

where the 

class_map_name

 is the class map from 

Step 1

.

For example:

hostname(config)# 

policy-map denied_apps_policy

hostname(config-pmap)# 

class denied_apps

hostname(config-pmap-c)#

Step 3

Determine which applications are permitted or denied by entering the following commands:

hostname(config-pmap-c)# 

deny 

{

all

 | 

protocol

}

hostname(config-pmap-c)# 

permit 

protocol

Where the 

protocol

 argument is the protocol name or number. To see the supported protocol names, use 

the 

permit ? 

or 

deny

 

?

 command.

You can combine 

permit

 and 

deny

 statements to narrow the traffic that you want denied. You must enter 

at least one 

deny

 statement. Unlike access lists, which have an implicit deny at the end, PISA actions 

have an implicit permit at the end.

For example, to permit all traffic except for Skype, eDonkey, and Yahoo, enter the following commands:

Содержание 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion







































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов