manualshive.com logo in svg

Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion, Руководство по настройке, Страница: 266 / 742

Поделиться
Скачать
Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion Скачать руководство пользователя страница 266

 

14-12

Catalyst 6500 Series Switch and Cisco 7600 Series Router Firewall Services Module Configuration Guide using ASDM

OL-20748-01

Chapter 14      Configuring Failover

  Understanding Failover

Failover Actions

In Active/Standby failover, failover occurs on a unit basis. Even on systems running in multiple context 
mode you cannot fail over individual or groups of contexts with Active/Standby failover. 

Table 14-1

 shows the failover action for each failure event. For each failure event, the table shows the 

failover policy (failover or no failover), the action taken by the active unit, the action taken by the 
standby unit, and any special notes about the failover condition and actions.

Active/Active Failover

This section describes Active/Active failover. This section includes the following topics:

•

Active/Active Failover Overview, page 14-13

•

Primary/Secondary Status and Active/Standby Status, page 14-13

•

Device Initialization and Configuration Synchronization, page 14-14

•

Command Replication, page 14-14

Table 14-1

Failover Behavior

Failure Event

Policy

Active Action

Standby Action

Notes

Active unit failed (power or 
hardware)

Failover

n/a

Become active

Mark active as 
failed

No hello messages are received on 
any monitored interface or the 
failover link.

Formerly active unit recovers

No failover

Become standby

No action

None.

Standby unit failed (power or 
hardware)

No failover

Mark standby as 
failed

n/a

When the standby unit is marked as 
failed, then the active unit will not 
attempt to fail over, even if the 
interface failure threshold is 
surpassed.

Failover link failed during 
operation

No failover

Mark failover 
interface as failed

Mark failover 
interface as failed

You should restore the failover link 
as soon as possible because the 
unit cannot fail over to the standby 
unit while the failover link is down.

Failover link failed at startup

No failover

Mark failover 
interface as failed

Become active

If the failover link is down at 
startup, both units will become 
active.

State link failed

No failover

No action

No action

State information will become out 
of date, and sessions will be 
terminated if a failover occurs.

Interface failure on active unit 
above threshold

Failover

Mark active as 
failed

Become active

None.

Interface failure on standby 
unit above threshold

No failover

No action

Mark standby as 
failed

When the standby unit is marked as 
failed, then the active unit will not 
attempt to fail over even if the 
interface failure threshold is 
surpassed.

Содержание 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion







































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов