manualshive.com logo in svg

Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion, Руководство по настройке, Страница: 269 / 742

Поделиться
Скачать
Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion Скачать руководство пользователя страница 269

 

14-15

Catalyst 6500 Series Switch and Cisco 7600 Series Router Firewall Services Module Configuration Guide using ASDM

OL-20748-01

Chapter 14      Configuring Failover

  Understanding Failover

The following commands are replicated to the standby unit:

•

all configuration commands except for the 

mode

 and 

failover lan unit

 commands

•

copy running-config startup-config

•

delete

•

mkdir

•

rename

•

rmdir

 

•

write memory

The following commands are not replicated to the standby unit:

•

all forms of the 

copy

 command except for 

copy running-config startup config

•

all forms of the 

write

 command except for 

write memory

•

asdm disconnect

•

debug

•

failover lan unit 

•

failover suspend-config-sync

•

mode

•

show

•

ssh disconnect

You can use the 

write standby

 command to resynchronize configurations that have become out of sync. 

For Active/Active failover, the 

write standby

 command behaves as follows:

•

If you enter the 

write standby

 command in the system execution space, the system configuration 

and the configurations for all of the security contexts on FWSM is written to the peer unit. This 
includes configuration information for security contexts that are in the standby state. You must enter 
the command in the system execution space on the unit that has failover group 1 in the active state.

•

If you enter the 

write standby

 command in a security context, only the configuration for the security 

context is written to the peer unit. You must enter the command in the security context on the unit 
where the security context appears in the active state.

Replicated commands are not saved to the Flash memory when replicated to the peer unit. They are 
added to the running configuration. To save replicated commands to Flash memory on both units, use 
the 

write memory

 or 

copy running-config startup-config

 command on the unit that you made the 

changes on. The command will be replicated to the peer unit and cause the configuration to be saved to 
Flash memory on the peer unit. 

Failover Triggers

In Active/Active failover, failover can be triggered at the unit level if one of the following events occurs:

•

The unit has a hardware failure.

•

The unit has a power failure.

•

The unit has a software failure.

•

The 

no failover active

 or the 

failover active

 command is entered in the system execution space.

Содержание 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion







































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов