manualshive.com logo in svg

Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion, Руководство по настройке, Страница: 257 / 742

Поделиться
Скачать
Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion Скачать руководство пользователя страница 257

 

14-3

Catalyst 6500 Series Switch and Cisco 7600 Series Router Firewall Services Module Configuration Guide using ASDM

OL-20748-01

Chapter 14      Configuring Failover

  Understanding Failover

The failover link uses a special VLAN interface that you do not configure as a normal networking 
interface; rather, it exists only for failover communications. This VLAN should only be used for the 
failover link (and optionally for the state link). Sharing the failover link VLAN with any other VLANs 
can cause intermittent traffic problems and ping and ARP failures. For inter-chassis failover, use 
dedicated interfaces on the switch for the failover link.

On systems running in multiple context mode, the failover link resides in the system context. This 
interface and the state link, if used, are the only interfaces that you can configure in the system context. 
All other interfaces are allocated to and configured from within security contexts.

Note

The IP address and MAC address for the failover link do not change at failover.

State Link

To use Stateful Failover, you must configure a state link to pass all state information. This link can be 
the same as the failover link, but we recommend that you assign a separate VLAN and IP address for the 
state link. The state traffic can be large, and performance is improved with separate links.

The state link interface is not configured as a normal networking interface; it exists only for Stateful 
Failover communications and, optionally, for the failover communication if you share the state and 
failover links. 

In multiple context mode, the state link resides in the system context. This interface and the failover 
interface are the only interfaces in the system context. All other interfaces are allocated to and configured 
from within security contexts.

Note

The IP address and MAC address for the state link do not change at failover.

Caution

All information sent over the failover and Stateful Failover links is sent in clear text unless you secure 
the communication with a failover key.

Intra- and Inter-Chassis Module Placement

You can place the primary and secondary FWSMs within the same switch or in two separate switches. 
The following sections describe each option:

•

Intra-Chassis Failover, page 14-3

•

Inter-Chassis Failover, page 14-4

Intra-Chassis Failover

If you install the secondary FWSM in the same switch as the primary FWSM, you protect against 
module-level failure. To protect against switch-level failure, as well as module-level failure, see the 

“Inter-Chassis Failover” section on page 14-4

.

Even though both FWSMs are assigned the same VLANs, only the active module takes part in 
networking. The standby module does not pass any traffic.

Содержание 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion







































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов