Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion Скачать руководство пользователя страница 479

Страница: 479 / 742

22-63

Catalyst 6500 Series Switch and Cisco 7600 Series Router Firewall Services Module Configuration Guide using ASDM

OL-20748-01

Chapter 22 Applying Application Layer Protocol Inspection

HTTP Inspection

hostname(config-pmap)#

Where the

policy_map_name

is the name of the policy map. The CLI enters policy-map configuration

mode.

Step 5

(Optional) To add a description to the policy map, enter the following command:

hostname(config-pmap)#

description

string

Step 6

To apply actions to matching traffic, perform the following steps.

Specify the traffic on which you want to perform actions using one of the following methods:

•

Specify the HTTP class map that you created in

Step 3

by entering the following command:

hostname(config-pmap)#

class

class_map_name

hostname(config-pmap-c)#

•

Specify traffic directly in the policy map using one of the

match

commands described in

Step 3

If you use a

match not

command, then any traffic that does not match the criterion in the

match

not

command has the action applied.

Specify the action you want to perform on the matching traffic by entering the following command:

hostname(config-pmap-c)# {[

drop-connection

[

send-protocol-error

reset

] [

log

]}

Not all options are available for each

match

class

command. See the CLI help or the

Catalyst

6500 Series Switch and Cisco 7600 Series Router Firewall Services Module Command Reference

for

the exact options available.

The

drop-connection

keyword drops the packet and closes the connection.

The

reset

keyword drops the packet, closes the connection, and sends a TCP reset to the server

and/or client.

The

log

keyword, which you can use alone or with one of the other keywords, sends a system log

message.

You can specify multiple

class

match

commands in the policy map. For information about the order

class

and

match

commands, see the

“Defining Actions in an Inspection Policy Map” section on

page 20-7

Step 7

To configure parameters that affect the inspection engine, perform the following steps:

To enter parameters configuration mode, enter the following command:

hostname(config-pmap)#

parameters

hostname(config-pmap-p)#

To check for HTTP protocol violations, enter the following command:

hostname(config-pmap-p)#

protocol-violation

[

action

[

drop-connection

reset

log

]]

Where the

drop-connection

action closes the connection. The

reset

action closes the connection

and sends a TCP reset to the client. The

log

action sends a system log message when this policy map

matches traffic.

To enforce banner obfuscation, enter the following command:

hostname(config-pmap-p)# mask-banner

The

mask-banner

command is the default when

policy-map type inspect

is configured, however

no mask-banner

can be entered to change the default.

To substitute a string for the server header field, enter the following command:

hostname(config-pmap-p)#

spoof-server

string

Содержание 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion







































































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion

Отзывы:

Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion, Руководство по настройке, Страница: 479 / 742

Результаты поиска

Содержание 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion

Отзывы: