manualshive.com logo in svg

Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion, Руководство по настройке, Страница: 368 / 742

Поделиться
Скачать
Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion Скачать руководство пользователя страница 368

 

18-8

Catalyst 6500 Series Switch and Cisco 7600 Series Router Firewall Services Module Configuration Guide using ASDM

OL-20748-01

Chapter 18      Applying Filtering Services

  Filtering URLs and FTP Requests with an External Server

Replace 

memory_pool_size

 with a value from 2 to 10240 for a URL buffer memory pool size of 2 KB to 

10,240 KB. 

Truncating Long HTTP URLs

By default, if a URL exceeds the maximum permitted size, then it is dropped. To avoid this, you can set 
the FWSM to truncate a long URL by entering the following command:

hostname(config)# 

filter url

 [

longurl-truncate

 | 

longurl-deny

 | 

cgi-truncate

]

The 

longurl-truncate

 option causes the FWSM to send only the hostname or IP address portion of the 

URL for evaluation to the filtering server when the URL is longer than the maximum length permitted. 
Use the 

longurl-deny

 option to deny outbound URL traffic if the URL is longer than the maximum 

permitted.

Use the 

cgi-truncate

 option to truncate CGI URLs to include only the CGI script location and the script 

name without any parameters. Many long HTTP requests are CGI requests. If the parameters list is very 
long, waiting and sending the complete CGI request including the parameter list can use up memory 
resources and affect firewall performance.

Exempting Traffic from Filtering

To exempt specific traffic from filtering, enter the following command:

hostname(config)# 

filter url except

 

source_ip

 

source_mask dest_ip

 

dest_mask

 

For example, the following commands cause all HTTP requests to be forwarded to the filtering server 
except for those from 10.0.2.54.

hostname(config)# 

filter url http 0 0 0 0

hostname(config)# 

filter url except 10.0.2.54 255.255.255.255 0 0

Note

If you have the 

filter java except

 command configured and the 

filter activex

 command configured for 

the same source destination pair, then no filtering will occur on port 80 for this source destination pair.

Filtering HTTPS URLs

You must identify and enable the URL filtering server before enabling HTTPS filtering.

Because HTTPS content is encrypted, the FWSM sends the URL lookup without directory and filename 
information. When the filtering server approves an HTTPS connection request, the FWSM allows the 
completion of SSL connection negotiation and allows the reply from the web server to reach the 
originating client. If the filtering server denies the request, the FWSM prevents the completion of SSL 
connection negotiation. The browser displays an error message such as “The Page or the content cannot 
be displayed.”

Note

The FWSM does not provide an authentication prompt for HTTPS, so a user must authenticate with the 
FWSM using HTTP or FTP before accessing HTTPS servers.

To enable HTTPS filtering, enter the following command:

hostname(config)# 

filter https

 

port localIP local_mask foreign_IP foreign_mask

 [

allow

]

Содержание 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion







































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов