Chrysler 200 CONVERTIBLE 2013 Скачать руководство пользователя страница 63 | Manualshive

Страница: 63 / 519

Chrysler 200 CONVERTIBLE 2013 Скачать руководство пользователя страница 63

WARNING!

Do not use accessory seat covers or place objects
between you and the side air bags; the performance
could be adversely affected and/or objects could be
pushed into you, causing serious injury.

Knee Impact Bolsters

The Knee Impact Bolster helps protect the knees of the

front passenger, and position the front occupant for the

best interaction with the Advanced Front Air Bag.
Along with seat belts and pretensioners, Advanced Front

Air Bags work with the bolsters to provide improved

protection for the driver and front passenger. Side air

bags also work with seat belts to improve occupant

protection.

Air Bag Deployment Sensors And Controls

Occupant Restraint Controller (ORC)

The ORC is part of a Federally regulated safety system

required for this vehicle.
The ORC determines if deployment of the front and/or

side air bags in a frontal or side collision is required.

Based on the impact sensor’s signals, a central electronic

ORC deploys the Advanced Front Air Bags, Supplemen-

tal Seat-Mounted Side Air Bags (SAB), and front seat belt

pretensioners, as required, depending on several factors,

including the severity and type of impact.
Advanced Front Air Bags are designed to provide addi-

tional protection by supplementing the seat belts in

certain frontal collisions depending on several factors,

including the severity and type of collision. Advanced

Front Air Bags are not expected to reduce the risk of

injury in rear, side, or rollover collisions.

2

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 61

«
...
61
62
63
64
65
...
»

Содержание 200 CONVERTIBLE 2013








































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов