Chrysler 200 CONVERTIBLE 2013 Скачать руководство пользователя страница 21

Страница: 21 / 519

Rearming The System

If something triggers the alarm, and no action is taken to

disarm it, the Vehicle Security Alarm will turn off the

horn after three minutes, turn off all of the visual signals

after 15 minutes, and then the Vehicle Security Alarm will

rearm itself.

To Arm The System

1. Remove the keys from the ignition switch and get out

of the vehicle.

2. Lock the door using either the power door lock switch

(one door must be open) or the LOCK button on the

Remote Keyless Entry (RKE) transmitter (doors can be

open or closed), and close all doors.

NOTE:

The Vehicle Security Alarm will not arm if you

lock the doors with the manual door lock plungers.

3. The Vehicle Security Light in the instrument cluster

will flash for 16 seconds. This shows that the Vehicle

Security Alarm is arming. During this period, if a door

is opened, the ignition switch is turned to ON/RUN,

or the power door locks are unlocked in any manner,

the Vehicle Security Alarm will automatically disarm.

NOTE:

•

During the 16-second arming period, if a door is

opened or the ignition switch is turned to ON/RUN,

the Vehicle Security Alarm will automatically disarm.

•

Once armed, the Vehicle Security Alarm disables the

unlock switch on the driver door trim panel and

passenger door trim panel, the trunk release button on

the instrument panel, and the HomeLink

/Garage

Door Opener (if equipped).

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 19

Содержание 200 CONVERTIBLE 2013








































































































































































































































































































































































































































































































































Результаты поиска

Содержание 200 CONVERTIBLE 2013

Отзывы:

Chrysler 200 CONVERTIBLE 2013, Руководство пользователя, Страница: 21 / 519

Результаты поиска

Содержание 200 CONVERTIBLE 2013

Отзывы: