Chrysler 200 CONVERTIBLE 2013 Скачать руководство пользователя страница 483

Страница: 483 / 519

Required Maintenance Intervals

Refer to the maintenance schedules on the following

page for the required maintenance intervals.

At Every Oil Change Interval As Indicated By Oil

Change Indicator System:

•

Change oil and filter.

•

Rotate the tires.

Rotate at the first sign of irregu-

lar wear, even if it occurs before the oil indicator
system turns on.

•

Inspect battery and clean and tighten terminals as

required.

•

Inspect automatic transmission fluid if equipped

with dipstick.

At Every Oil Change Interval As Indicated By Oil

Change Indicator System:

•

Inspect brake pads, shoes, rotors, drums, hoses

and park brake.

•

Inspect engine cooling system protection and

hoses.

•

Inspect exhaust system.

•

Inspect engine air cleaner if using in dusty or

off-road conditions.

MAINTENANCE SCHEDULES 481

Содержание 200 CONVERTIBLE 2013








































































































































































































































































































































































































































































































































Результаты поиска

Содержание 200 CONVERTIBLE 2013

Отзывы:

Chrysler 200 CONVERTIBLE 2013, Руководство пользователя, Страница: 483 / 519

Результаты поиска

Содержание 200 CONVERTIBLE 2013

Отзывы: