Chrysler 200 CONVERTIBLE 2013 Скачать руководство пользователя страница 405

Страница: 405 / 519

WARNING! (Continued)

•

Only use the jack in the positions indicated and for
lifting this vehicle during a tire change.

•

If working on or near a roadway, be extremely
careful of motor traffic.

•

To assure that spare tires, flat or inflated, are
securely stowed, spares must be stowed with the
valve stem facing the ground.

CAUTION!

Do not attempt to raise the vehicle by jacking on
locations other than those indicated in the Jacking
Instructions for this vehicle.

NOTE:

Refer to the Compact Spare Tire section of Tires--

General Information--for information about the spare

tire, its use, and operation.
1. Remove the scissors jack and lug wrench from the

spare wheel as an assembly. Turn the jack screw to the

left to loosen the lug wrench, and remove the wrench

from the jack assembly.

Jack Warning Label

WHAT TO DO IN EMERGENCIES 403

Содержание 200 CONVERTIBLE 2013








































































































































































































































































































































































































































































































































Результаты поиска

Содержание 200 CONVERTIBLE 2013

Отзывы:

Chrysler 200 CONVERTIBLE 2013, Руководство пользователя, Страница: 405 / 519

Результаты поиска

Содержание 200 CONVERTIBLE 2013

Отзывы: