Chrysler 200 CONVERTIBLE 2013 Скачать руководство пользователя страница 51

Страница: 51 / 519

Restraints” section. The chart below defines the type of

feature for each seating position.

Driver

Center

Passenger

First Row

N/A

ALR

Second Row

ALR

N/A

ALR

•

N/A — Not Applicable

•

ALR — Automatic Locking Retractor

If the passenger seating position is equipped with an

ALR and is being used for normal usage:
Only pull the belt webbing out far enough to comfortably

wrap around the occupant’s mid-section so as to not

activate the ALR. If the ALR is activated, you will hear a

ratcheting sound as the belt retracts. Allow the webbing

to retract completely in this case and then carefully pull

out only the amount of webbing necessary to comfort-

ably wrap around the occupant’s mid-section. Slide the

latch plate into the buckle until you hear a

click.

Automatic Locking Retractor Mode (ALR) — If
Equipped

In this mode, the shoulder belt is automatically pre-

locked. The belt will still retract to remove any slack in

the shoulder belt. The Automatic Locking Mode is avail-

able on all passenger-seating positions with a combina-

tion lap/shoulder belt. Use the Automatic Locking Mode

anytime a child safety seat is installed in a seating

position that has a belt with this feature. Children 12

years old and under should always be properly re-

strained in the rear seat.

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 49

Содержание 200 CONVERTIBLE 2013








































































































































































































































































































































































































































































































































Результаты поиска

Содержание 200 CONVERTIBLE 2013

Отзывы:

Chrysler 200 CONVERTIBLE 2013, Руководство пользователя, Страница: 51 / 519

Результаты поиска

Содержание 200 CONVERTIBLE 2013

Отзывы: