Chrysler 200 CONVERTIBLE 2013 Скачать руководство пользователя страница 113

Страница: 113 / 519

Wind Stop — If Equipped

The Wind Stop installs in the backseat area of the vehicle.

The Wind Stop will not interfere with power top opera-

tion. Therefore, it can remain installed when the top is up.

However, when not in use, the Wind Stop folds to allow

for convenient storage underneath the cargo shield in the

trunk.

NOTE:

It is recommended that you lower the convert-

ible top before installing or removing the Wind Stop.

Installing The Wind Stop

1. Remove the Wind Stop from the trunk.
2. Unfold the Wind Stop framework.
3. Lay the small frame (1) flat on top of the large frame

(2) and snap the two frames together by engaging the

frame lock (3).

NOTE:

The frames must lie flat on each other in order to

snap them together.

UNDERSTANDING THE FEATURES OF YOUR VEHICLE 111

Содержание 200 CONVERTIBLE 2013








































































































































































































































































































































































































































































































































Результаты поиска

Содержание 200 CONVERTIBLE 2013

Отзывы:

Chrysler 200 CONVERTIBLE 2013, Руководство пользователя, Страница: 113 / 519

Результаты поиска

Содержание 200 CONVERTIBLE 2013

Отзывы: