Chrysler 200 CONVERTIBLE 2013 Скачать руководство пользователя страница 26

Страница: 26 / 519

•

For vehicles not equipped with the EVIC, perform the

following procedure:

1. Press and hold the UNLOCK button on a programmed

RKE transmitter for at least four seconds, but not

longer than 10 seconds. Then, press and hold the

LOCK button while still holding the UNLOCK button.

2. Release both buttons at the same time.
3. Test the feature while outside of the vehicle by press-

ing the LOCK/UNLOCK buttons on the RKE trans-

mitter with the ignition in the LOCK position and the

key removed.

4. Repeat these steps if you want to return this feature to

its previous setting.

NOTE:

If there is no key in the ignition switch, pressing

the LOCK button on the RKE transmitter while you are in

the vehicle will activate the Vehicle Security Alarm.

Opening a door with the Vehicle Security Alarm acti-

vated will cause the alarm to sound. Press the UNLOCK

button to deactivate the Vehicle Security Alarm System.

Illuminated Approach — If Equipped

This feature activates the headlights for up to 90 seconds

when the doors are unlocked with the RKE transmitter.

The time for this feature is programmable on vehicles

equipped with the Electronic Vehicle Information Center

(EVIC). Refer to “Electronic Vehicle Information Center

(EVIC)/Personal Settings (Customer-Programmable Fea-

tures)” in “Understanding Your Instrument Panel” for

further information.

24 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

Содержание 200 CONVERTIBLE 2013








































































































































































































































































































































































































































































































































Результаты поиска

Содержание 200 CONVERTIBLE 2013

Отзывы:

Chrysler 200 CONVERTIBLE 2013, Руководство пользователя, Страница: 26 / 519

Результаты поиска

Содержание 200 CONVERTIBLE 2013

Отзывы: