Chrysler 200 CONVERTIBLE 2013 Скачать руководство пользователя страница 331

Страница: 331 / 519

The parking brake lever is located in the center console.

To apply the parking brake, pull the lever up as firmly as

possible. To release the parking brake, pull the lever up

slightly, press the center button, then lower the lever

completely.

When the parking brake is applied with the ignition

switch ON, the “Brake Warning Light” in the instrument

cluster will illuminate.

NOTE:

•

When the parking brake is applied and the transmis-

sion is placed in gear, the “Brake Warning Light” will

flash. If vehicle speed is detected, a chime will sound

to alert the driver. Fully release the parking brake

before attempting to move the vehicle.

•

This light only shows that the parking brake is ap-

plied. It does not show the degree of brake application.

When parking on a hill, it is important to turn the front

wheels toward the curb on a downhill grade and away

from the curb on an uphill grade. Apply the parking

brake before placing the shift lever in PARK, otherwise

the load on the transmission locking mechanism may

Parking Brake

STARTING AND OPERATING 329

Содержание 200 CONVERTIBLE 2013








































































































































































































































































































































































































































































































































Результаты поиска

Содержание 200 CONVERTIBLE 2013

Отзывы:

Chrysler 200 CONVERTIBLE 2013, Руководство пользователя, Страница: 331 / 519

Результаты поиска

Содержание 200 CONVERTIBLE 2013

Отзывы: