Chrysler 200 CONVERTIBLE 2013 Скачать руководство пользователя страница 279

Страница: 279 / 519

Once the audio device is connected and synchronized to

the vehicle’s iPod

/USB/MP3 control system (iPod

external USB device may take a few minutes to connect),

the audio device starts charging and is ready for use by

pressing radio switches, as described below.

NOTE:

If the audio device battery is completely dis-

charged, it may not communicate with the iPod

/USB/

MP3 control system until a minimum charge is attained.

Leaving the audio device connected to the iPod

/USB/

MP3 control system may charge it to the required level.

Using This Feature

By using iPod cable or external USB device to connect to

USB port:

•

The audio device can be played on the vehicle’s sound

system, providing metadata (artist, track title, album,

etc.) information on the radio display.

•

The audio device can be controlled using the radio

buttons to Play, Browse, and List the iPod

contents.

•

The audio device battery charges when plugged into

the USB/AUX connector (if supported by the specific

audio device)

USB Connector Port

UNDERSTANDING YOUR INSTRUMENT PANEL 277

Содержание 200 CONVERTIBLE 2013








































































































































































































































































































































































































































































































































Результаты поиска

Содержание 200 CONVERTIBLE 2013

Отзывы:

Chrysler 200 CONVERTIBLE 2013, Руководство пользователя, Страница: 279 / 519

Результаты поиска

Содержание 200 CONVERTIBLE 2013

Отзывы: