Chrysler 200 CONVERTIBLE 2013 Скачать руководство пользователя страница 154

Страница: 154 / 519

Recent Calls

If your phone supports “Automatic Phonebook Down-

load”, Uconnect™ Phone can list your Outgoing, Incom-

ing and Missed Calls.

SMS

Uconnect™ Phone can read or send new messages on

your phone.

Read Messages:

If you receive a new text message while your phone is

connected to Uconnect™ Phone, an announcement will

be made to notify you that you have a new text message.

If you wish to hear the new message:

•

Press the

button.

•

After the “Ready” prompt and the following beep, say

“SMS Read” or “Read Messages.”

•

Uconnect™ Phone will play the new text message for

you.

After reading a message, you can “Reply” or “Forward”

the message using Uconnect™ Phone.

Send Messages:

You can send messages using Uconnect™ Phone. To send

a new message:

•

Press the

button.

•

After the “Ready” prompt and the following beep, say

“SMS Send” or “Send Message.”

•

You can either say the message you wish to send or say

“List Messages.” There are 20 preset messages.

To send a message, press the

button while the

system is listing the message and say “Send.”

152 UNDERSTANDING THE FEATURES OF YOUR VEHICLE

Содержание 200 CONVERTIBLE 2013








































































































































































































































































































































































































































































































































Результаты поиска

Содержание 200 CONVERTIBLE 2013

Отзывы:

Chrysler 200 CONVERTIBLE 2013, Руководство пользователя, Страница: 154 / 519

Результаты поиска

Содержание 200 CONVERTIBLE 2013

Отзывы: