Chrysler 200 CONVERTIBLE 2013 Скачать руководство пользователя страница 273

Страница: 273 / 519

Press the INFO button once more to return to

elapsed

time

priority mode.

Press and hold the INFO button for three seconds or

more and the radio will display song titles for each file.
Press and hold the INFO button again for three seconds

to return to

elapsed time

display.

Operation Instructions - Auxiliary Mode

The auxiliary (AUX) jack is an audio input jack which

allows the user to plug in a portable device such as an

MP3 player or cassette player and utilize the vehicle’s

audio system to amplify the source and play through the

vehicle speakers.
Pressing the AUX button will change the mode to auxil-

iary device if the AUX jack is connected.

NOTE:

The AUX device must be turned on and the

device’s volume set to the proper level. If the AUX audio

is not loud enough, turn the device’s volume up. If the

AUX audio sounds distorted, turn the device’s volume

down.

TIME Button (Auxiliary Mode)

Press this button to change the display to time of day. The

time of day will display for five seconds (when the

ignition is OFF).

Uconnect™ Multimedia (Satellite Radio) — If
Equipped

Satellite radio uses direct satellite-to-receiver broadcast-

ing technology to provide clear digital sound, coast to

coast. The subscription service provider is Sirius Satellite

Radio. This service offers over 130 channels of music,

sports, news, entertainment, and programming for chil-

dren, directly from its satellites and broadcasting studios.

UNDERSTANDING YOUR INSTRUMENT PANEL 271

Содержание 200 CONVERTIBLE 2013








































































































































































































































































































































































































































































































































Результаты поиска

Содержание 200 CONVERTIBLE 2013

Отзывы:

Chrysler 200 CONVERTIBLE 2013, Руководство пользователя, Страница: 273 / 519

Результаты поиска

Содержание 200 CONVERTIBLE 2013

Отзывы: