Chrysler 200 CONVERTIBLE 2013 Скачать руководство пользователя страница 214

Страница: 214 / 519

Ski Pass-Through

There is a ski pass-through door located behind the rear

seat armrest that allows longer items, such as snow skis,

to be stored in the rear cargo area. Lower the armrest and

pull downward on the latch to open the ski pass-through

door.

REAR WINDOW FEATURES

Rear Window Defroster

The rear window defroster button is located on

the climate control (Mode) knob. Press this button

to turn on the rear window defroster and the heated

outside mirrors (if equipped). An indicator in the button

will illuminate when the rear window defroster is on. The

rear window defroster automatically turns off after ap-

proximately 10 minutes. For an additional five minutes of

operation, press the button a second time.

NOTE:

To prevent excessive battery drain, use the rear

window defroster only when the engine is operating.

Ski Pass-Through

212 UNDERSTANDING THE FEATURES OF YOUR VEHICLE

Содержание 200 CONVERTIBLE 2013








































































































































































































































































































































































































































































































































Результаты поиска

Содержание 200 CONVERTIBLE 2013

Отзывы:

Chrysler 200 CONVERTIBLE 2013, Руководство пользователя, Страница: 214 / 519

Результаты поиска

Содержание 200 CONVERTIBLE 2013

Отзывы: