Chrysler 200 CONVERTIBLE 2013 Скачать руководство пользователя страница 280

Страница: 280 / 519

Controlling The iPod

Or External USB Device

Using Radio Buttons

To get into the iPod

/USB/MP3 control mode and access

a connected audio device, either press the “AUX” button

on the radio faceplate or press the VR button and say

USB

Switch to USB

. Once in the iPod

/USB/MP3

control mode, audio tracks (if available from audio

device) start playing over the vehicle’s audio system.

Play Mode

When switched to iPod

/USB/MP3 control mode, the

iPod

or external USB device automatically starts Play

mode. In Play mode, the following buttons on the radio

faceplate may be used to control the iPod

or external

USB device and display data:

•

Use the TUNE control knob to select the next or

previous track.

•

Turning it clockwise (forward) by one click, while

playing a track, skips to the next track or press the

VR button and say

Next Track

•

Turning it counterclockwise (backward) by one click,

will jump to the previous track in the list or press the

VR button and say

Previous Track

•

Jump backward in the current track by pressing and

holding the <<

button. Holding the <<

button long enough will jump to the beginning of the

current track.

•

Jump forward in the current track by pressing and

holding the

>> button.

•

A single press backward <<

or forward

>> will

jump backward or forward respectively, for five sec-

onds.

278 UNDERSTANDING YOUR INSTRUMENT PANEL

Содержание 200 CONVERTIBLE 2013








































































































































































































































































































































































































































































































































Результаты поиска

Содержание 200 CONVERTIBLE 2013

Отзывы:

Chrysler 200 CONVERTIBLE 2013, Руководство пользователя, Страница: 280 / 519

Результаты поиска

Содержание 200 CONVERTIBLE 2013

Отзывы: