Chrysler 200 CONVERTIBLE 2013 Скачать руководство пользователя страница 61 | Manualshive

Страница: 61 / 519

Chrysler 200 CONVERTIBLE 2013 Скачать руководство пользователя страница 61

•

Driver Advanced Front Air Bag

•

Passenger Advanced Front Air Bag

•

Supplemental Seat-Mounted Side Air Bags (SAB)

•

Front and Side Impact Sensors

•

Front Seat Belt Pretensioners, Seat Belt Buckle Switch,

and Seat Track Position Sensors

Advanced Front Air Bag Features

The Advanced Front Air Bag system has multistage

driver and front passenger air bags. This system provides

output appropriate to the severity and type of collision as

determined by the Occupant Restraint Controller (ORC),

which may receive information from the front impact

sensors.
The first stage inflator is triggered immediately during an

impact that requires air bag deployment. This low output

is used in less severe collisions. A higher energy output is

used for more severe collisions.

WARNING!

•

No objects should be placed over or near the air
bag on the instrument panel, because any such
objects could cause harm if the vehicle is in a
collision severe enough to cause the air bag to
inflate.

•

Do not put anything on or around the air bag
covers or attempt to open them manually. You may
damage the air bags and you could be injured
because the air bags may no longer be functional.
The protective covers for the air bag cushions are
designed to open only when the air bags are
inflating.

(Continued)

2

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 59

«
...
59
60
61
62
63
...
»

Содержание 200 CONVERTIBLE 2013








































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов