Chrysler 200 CONVERTIBLE 2013 Скачать руководство пользователя страница 324

Страница: 324 / 519

AUTOSTICK

— IF EQUIPPED

AutoStick

is a driver-interactive transmission feature

providing manual shift control, giving you more control

of the vehicle. AutoStick

allows you to maximize engine

braking, eliminate undesirable upshifts and downshifts,

and improve overall vehicle performance. This system

can also provide you with more control during passing,

city driving, cold slippery conditions, mountain driving,

trailer towing, and many other situations.

Operation

When the shift lever is in the AutoStick

position (below

the DRIVE position), it can be moved from side to side.

This allows the driver to manually select the transmission

gear being used. Moving the shift lever to the left (-)

triggers a downshift and to the right (+) an upshift. The

current gear will be displayed in the instrument cluster.
In AutoStick

mode, the transmission will shift up or

down when the driver moves the shift lever to the right

(+) or left (-), unless an engine lugging or overspeed

condition would result. It will remain in the selected gear

until another upshift or downshift is chosen, except as

described below.

•

The transmission will automatically downshift to first

gear when coming to a stop. After a stop, the driver

should manually upshift (+) the transmission as the

vehicle is accelerated.

•

You can start out, from a stop, in any gear except top

gear. Tapping (+) (at a stop) will allow starting in

second gear. Starting out in second gear is helpful in

snowy or icy conditions.

•

The transmission will automatically upshift when nec-

essary to prevent engine over-speed.

•

If a downshift would cause the engine to over-speed,

that shift will not occur until it is safe for the engine

322 STARTING AND OPERATING

Содержание 200 CONVERTIBLE 2013








































































































































































































































































































































































































































































































































Результаты поиска

Содержание 200 CONVERTIBLE 2013

Отзывы:

Chrysler 200 CONVERTIBLE 2013, Руководство пользователя, Страница: 324 / 519

Результаты поиска

Содержание 200 CONVERTIBLE 2013

Отзывы: