Chrysler 200 CONVERTIBLE 2013 Скачать руководство пользователя страница 2

Страница: 2 / 519

VEHICLES SOLD IN CANADA

With respect to any Vehicles Sold in Canada, the name Chrysler

Group LLC shall be deemed to be deleted and the name Chrysler

Canada Inc. used in substitution therefore.

DRIVING AND ALCOHOL

Drunken driving is one of the most frequent causes of accidents.
Your driving ability can be seriously impaired with blood alcohol

levels far below the legal minimum. If you are drinking, don’t drive.

Ride with a designated non-drinking driver, call a cab, a friend, or use

public transportation.

WARNING!

Driving after drinking can lead to an accident. Your percep-

tions are less sharp, your reflexes are slower, and your judg-

ment is impaired when you have been drinking. Never drink

and then drive.

This manual illustrates and describes the operation of features and

equipment that are either standard or optional on this vehicle. This

manual may also include a description of features and equipment

that are no longer available or were not ordered on this vehicle.

Please disregard any features and equipment described in this

manual that are not on this vehicle.
Chrysler Group LLC reserves the right to make changes in design

and specifications, and/or make additions to or improvements to its

products without imposing any obligation upon itself to install them

on products previously manufactured.

Содержание 200 CONVERTIBLE 2013








































































































































































































































































































































































































































































































































Результаты поиска

Содержание 200 CONVERTIBLE 2013

Отзывы:

Chrysler 200 CONVERTIBLE 2013, Руководство пользователя, Страница: 2 / 519

Результаты поиска

Содержание 200 CONVERTIBLE 2013

Отзывы: