Chrysler 200 CONVERTIBLE 2013 Скачать руководство пользователя страница 276

Страница: 276 / 519

SCAN Button

Pressing the SCAN button causes the tuner to search for

the next channel, pausing for eight seconds before con-

tinuing to the next. To stop the search, press the SCAN

button a second time.

INFO Button

Pressing the INFO button will cycle the display informa-

tion between Artist, Song Title, and Composer (if avail-

able). Also, pressing and holding the INFO button for an

additional three seconds will make the radio display the

Song Title all of the time (press and hold again to return

to normal display).

RW/FF

Pressing the RW (Rewind) or FF (Fast Forward) buttons

causes the tuner to search for the next channel in the

direction of the arrows.

TUNE Control (Rotary)

Turn the rotary TUNE/SCROLL control knob clockwise

to increase or counterclockwise to decrease the channel.

MUSIC TYPE Button

Pressing this button once will turn on the Music Type

mode for five seconds. Pressing the MUSIC TYPE button

or turning the TUNE/SCROLL control knob within five

seconds will allow the program format type to be se-

lected.
Toggle the MUSIC TYPE button again to select the music

type.
By pressing the SEEK button when the Music Type

function is active, the radio will be tuned to the next

channel with the same selected Music Type name.
If a preset button is activated while in the Music Type

(Program Type) mode, the Music Type mode will be

exited and the radio will tune to the preset channel.

274 UNDERSTANDING YOUR INSTRUMENT PANEL

Содержание 200 CONVERTIBLE 2013








































































































































































































































































































































































































































































































































Результаты поиска

Содержание 200 CONVERTIBLE 2013

Отзывы:

Chrysler 200 CONVERTIBLE 2013, Руководство пользователя, Страница: 276 / 519

Результаты поиска

Содержание 200 CONVERTIBLE 2013

Отзывы: