Chrysler 200 CONVERTIBLE 2013 Скачать руководство пользователя страница 294

Страница: 294 / 519

•

While operating in AUTO, the system will not auto-

matically sense the presence of fog, mist or ice on the

windshield. The defrost mode must be manually se-

lected to clear the windshield and side glass.

Blower Control

For full automatic operation or for

automatic blower operation, turn the

knob to the AUTO position. In manual

mode there are seven blower speeds

that can be individual selected. In off

position the blower will shut off.

Manual Operation

This system offers a full complement of manual override

features, which consist of Blower Preferred Automatic,

Mode Preferred Automatic, or Blower and Mode Pre-

ferred Automatic. This means the operator can override

the blower, the mode, or both. There is a manual blower

range for times when the AUTO setting is not desired.

The blower can be set to any fixed blower speed by

rotating the Blower Control knob (on the left).

NOTE:

Please read the Automatic Temperature Control

Operation Chart that follows for details.

292 UNDERSTANDING YOUR INSTRUMENT PANEL

Содержание 200 CONVERTIBLE 2013








































































































































































































































































































































































































































































































































Результаты поиска

Содержание 200 CONVERTIBLE 2013

Отзывы:

Chrysler 200 CONVERTIBLE 2013, Руководство пользователя, Страница: 294 / 519

Результаты поиска

Содержание 200 CONVERTIBLE 2013

Отзывы: