Chrysler 200 CONVERTIBLE 2013 Скачать руководство пользователя страница 256

Страница: 256 / 519

radio display. If a CD does not go into the slot more than

1.0 in (2.5 cm), a disc may already be loaded and must be

ejected before a new disc can be loaded.
If you insert a disc with the ignition ON and the radio

ON, the unit will switch from radio to CD mode and

begin to play when you insert the disc. The display will

show the track number, and index time in minutes and

seconds. Play will begin at the start of track 1.

CAUTION!

•

This CD player will accept 4–3/4 in (12 cm) discs
only. The use of other sized discs may damage the
CD player mechanism.

•

Do not use adhesive labels. These labels can peel
away and jam the player mechanism.

(Continued)

CAUTION! (Continued)

•

The RES Media Center is a single CD player. Do
not attempt to insert a second CD if one is already
loaded.

EJECT Button - Ejecting a CD

Press the EJECT button to eject the CD.

If you have ejected a disc and have not removed it within

10 seconds, it will be reloaded. If the CD is not removed,

the radio will reinsert the CD but will not play it.
A disc can be ejected with the radio and ignition OFF.

NOTE:

Ejecting with the ignition OFF is not allowed on

convertible or soft-top models (if equipped).

254 UNDERSTANDING YOUR INSTRUMENT PANEL

Содержание 200 CONVERTIBLE 2013








































































































































































































































































































































































































































































































































Результаты поиска

Содержание 200 CONVERTIBLE 2013

Отзывы:

Chrysler 200 CONVERTIBLE 2013, Руководство пользователя, Страница: 256 / 519

Результаты поиска

Содержание 200 CONVERTIBLE 2013

Отзывы: