Chrysler 200 CONVERTIBLE 2013 Скачать руководство пользователя страница 44 | Manualshive

Страница: 44 / 519

Chrysler 200 CONVERTIBLE 2013 Скачать руководство пользователя страница 44

children to slide the shoulder belt behind them or under

their arm.
If a child from 1 to 12 years old (not in a rear facing child

seat) must ride in the front passenger seat, move the seat

as far back as possible and use the proper child restraint.

(Refer to “Child Restraints”)
You should read the instructions provided with your

child restraint to make sure that you are using it properly.
2.

All occupants should always wear their lap and
shoulder belts properly.

3.

The driver and front passenger seats should be
moved back as far as practical to allow the Advanced
Front Air Bags room to inflate.

4.

Do not lean against the door or window. If your
vehicle has side air bags, and deployment occurs, the
side air bags will inflate forcefully into the space
between you and the door.

5.

If the air bag system in this vehicle needs to be
modified to accommodate a disabled person, contact
the Customer Center. Phone numbers are provided
under

&

If You Need Assistance

&

.

WARNING!

•

Relying on the air bags alone could lead to more
severe injuries in a collision. The air bags work
with your seat belt to restrain you properly. In
some collisions, the air bags won’t deploy at all.
Always wear your seat belts even though you have
air bags.

(Continued)

42 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

«
...
42
43
44
45
46
...
»

Содержание 200 CONVERTIBLE 2013








































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов