CG Emotron VFX Series, Инструкция по эксплуатации

Страница: 14 / 268

10 Introduction CG Drives & Automation, 01-5326-01r5
1.5 Standards
The AC drives described in this instruction manual comply
with the standards listed in Table 2. For the declarations of
conformity and manufacturer’s certificate, contact your
supplier for more information or visit www.emotron.com/
www.cgglobal.com.
1.5.1 Product standard for EMC
Product standard EN(IEC)61800-3, second edition of 2004
defines the:
First Environment (Extended EMC) as environment that
includes domestic premises. It also includes establishments
directly connected without intermediate transformers to a
low voltage power supply network that supplies buildings
used for domestic purposes.
Category C2: Power Drive System (PDS) of rated
voltage<1.000 V, which is neither a plug in device nor a
movable device and, when used in the first environment, is
intended to be installed and commissioned only by a
professional.
Second environment (Standard EMC) includes all other
establishments.
Category C3: PDS of rated voltage <1.000 V, intended for
use in the second environment and not intended for use in
the first environment.
Category C4: PDS or rated voltage equal or above 1.000 V,
or rated current equal to or above 400 A, or intended for use
in complex systems in the second environment.
The AC drive complies with the product standard
EN(IEC) 61800-3:2004 (Any kind of metal screened cable
may be used). The standard AC drive is designed to meet the
requirements according to category C3, for a motor cable
length of maximum 80 m.
By using the optional “Extended EMC” filter the AC drive
fulfils requirements according to category C2.
15 15 Option position, communication
N= No option
D= DeviceNet
P= Profibus
S= RS232/485
M= Modbus/TCP
E= EtherCAT
F= Modbus/TCP 2-port, M12
A= Profinet IO 1-port
B= Profinet IO 2-port
G= EtherNet/IP 2-port
C= CANopen
16 16 Software type
A= Standard software, Language set 1
I = Std sw Language set 2
See menu “Language [211]” on page 91
17 -
Motor PTC.
(Only valid for 002-105/B-D2(69)) N= No option
P= PTC
18 -
Gland kit.
(Only valid for 002-074/IP54) –= Glands not included
G= Gland kit included
19 17 Approval/certification
–= CE approved
D= Marine DNV Product certificate (above 100 kW)
+ CE approved
M= Marine v CE approved
U=UL/cUL approved
Position
for 002-074
Position
for 090-3K0
Configuration
WARNING!
In a domestic environment this product
may cause radio interference, in which
case it may be necessary to take adequate
additional measures.
WARNING!
The standard AC drive, complying with
category C3, is not intended to be used on
a low-voltage public network which
supplies domestic premises; radio
interference is expected if used in such a
network. Contact your supplier if you need
additional measures.