Heat Manager Pro User Manual V1.5 Page 19
Select whether you want to set the channel as a programmer, a slave (follower of a pro-
grammer), remote (when you’re interlinking more than 1 Heatmanager Pro’s) or unused
(no function). When you push back you go to the previous screen.
Note that when you select [SLAVE], it will take the setpoint of a the last previous chan-
nel that was set as a programmer. So when channel 1 and 2 are programmers, 3 and 4
are unused and 5 and 6 are slaves, the channel 5 and 6 take the setpoint of channel 2.
After you made a selection, the [NEXT] button appears. With that you continue to the
next channel.
After setting all 6 (or 12) channels, the systems finalizes the setup and continues back
to the main menu.
With the [SLAVE SV OFFSET] function you can enter an adjustment offset that must be
used on top of the programmer set value. This is only used with the channel in slave
mode.
