Heat Manager Pro User Manual V1.5 Page 52
3.2
M
ASTER
-
SLAVE CONFIGURATION
(
CONNECT MULTIPLE HEATMANAGER
P
RO
’
S
)
*Note:
the Master-slave setting can only be changed with all channels in stop status.
Please note that the heat manager can operate in the so called “stand alone”, master- or slave
mode.
There can only be 1 master and a maximum of up to 4 slaves.
T
he stand-alone mode is used if the Heatmanager Pro does not have to be interconnected to
other heatmanagers. Please select this option because if you set it to master or slave, it tries to
interconnect to other heatmanagers, so only set it to master- and or slave when this is
necessary.
When you set the Heatmanager Pro to master, it will act as the master-programmer
Heatmanager Pro for other interconnected slave-Heatmanager Pros.
Please note, that the actual setpoint of channel 1 of the master-Heatmanager Pro will be used
as the setvalue for the slave-heatmanagers. So only channel 1 of the master Heatmanager Pro
will be sent to the slave-Heatmanger Pro(s).
