Heat Manager Pro User Manual V1.5 Page 38
If the file did not exist the auto .csv write will start, this is shown with a green button and the sta-
tus message will indicate “running OK” in green color.
When you push [WRITE LAST DATA TO CSV AND STOP AUTO CSV WRITING] the last items
in the 100 position buffer (also when not full) will be added to the existing .csv file and the file
will be closed.
Note:
the start/stop procedure is shown here for the usb-stick, the procedure for the SD-card is
exactly the same.
Note:
when the usb-stick or sd-card is removed and put back again, the system detects this and
you can continue recording on it by pushing the [RESUME] button. When you push the
[ABORT] the procedure is aborted and no action is taken with the file on the usb-stick or sd-
card.
[START FILE MANAGER]
Pops up a screen where you can copy files between the
SD-card and the USB-stick
[EXTRA INFO]
Extra information on how the CSV auto write works
[BACK]
Go back to the previous screen
[MAIN MENU]
Go to the main menu
Note: before removing the usb-stick or sd-card, first verify that the auto CSV write
procedure is not active on the main-menu\data menu\CSV auto write screen and
stop it before removing the device so the last measured values can be added and
the device can be closed.
Failing to do so can result in a damaged usb-stick or
sd-card with loss of all data.
