Heat Manager Pro User Manual V1.5 Page 24
Auto write temperature measurements to .csv file on either usb-stick or sd-card (4301TAD
screen only) when the recorder starts/stops when one of the programmers starts running
When one of the programmers starts normally also the recorder will start. It is possible that the
file number that will be used to write to the .csv file already exists, a warning screen will appear
[YES] Delete the existing file on usb-stick or sd-card and start writing a new file
[NO]
Abort auto csv write procedure. To enter another filenumber and restart the auto csv
write procedure, go to the main menu\data menu\CSV auto write menu item.
When all programmers are stopped, the .CSV auto write procedure will write the remaining
measurements in the measurement buffer to the .CSV file, close it and automatically increment
the file number.
Note:
if the recorder start/stop setting (main-menu\data menu\recorder start-stop) is set to
always on, you must always verify on the data menu\CSV auto write screen if the auto
CSV write procedure is running correctly on the usb-stick or the sd-card (4301TAD
screen only). When you want to use the file: first stop the auto write procedure and after
that remove the usb-stick or copy the file from the sd-card to the usb-stick.
Failing to do
so can result in a damaged usb-stick or sd-card with loss of all data.
