Heat Manager Pro User Manual V1.5 Page 46
When you push [DIO CHANNEL INFO] the following screen will appear:
This screen shows the actual status of the DIO outputs. DO1-DO2 are only for internal use in
the Heatmanager (for the hold function).
DO4 event 4 temperature alarm can be used when a measured temperature of one of the chan-
nels deviates more than allowed from the setvalue. This deviation can be adjusted in the main-
menu/basic settings/alarm-settings screen. This is done for each channel separately and for
each segment of the profile. Here you can also adjust the way event 4 temperature alarm oper-
ates.
DO5 will become active if all temperatures of all the channels reach their final temperature set-
value.
DO6 can be used when a heater break alarm occurs. For this an extra external current meas-
urement module (Z-CT) is necessary
DO7 can be used when one of the channels has a broken thermocouple.
DO8 can be used for an emergency stop contact that can trip the main switch using an un-
dervoltage coil or trip input (contact your supplier)
[MAIN MENU]
Back to main menu
[BACK]
Back to previous screen
