CARPENTER MODEL 93 COMPU-STRIP
Phone: 315-682-9176 Fax: 315-682-9160
Page
6
Revised 08/23/13 Website: www.carpentermfg.com E-mail: [email protected]
CARPENTER MODEL 93 COMPU-STRIP
INSTALLATION INSTRUCTIONS
SAFETY GUARDING
The Model 93 comes equipped with a LEXAN guard containing a safety interlock switch. The machine will not run unless
the guard is in the closed position
**IMPORTANT** DO NOT ATTEMPT TO DEFEAT THE FUNCTION OR PURPOSE OF
THE SAFETY INTERLOCK SWITCH. SERIOUS INJURY TO THE OPERATORS EYES, FINGERS OR OTHER BODY
PARTS MAY RESULT FROM ATTEMPTS TO OPERATE THE MODEL 93 WITH THE SAFETY GUARD IN THE RAISED
POSITION.
WIRE GUIDE HOLDER / WIRE STRAIGHTENER
The Model 93 comes equipped with
#8836
Guide Tube Holder with
#8393
Wire Straightener attached. Install holder to
the
left side of the cabinet with (2)
#3947
Screws and (2)
#1810
Washers. After installation place the Input
Guide Tubes and
Exit Guides into the holes. The Wire Straightener is used to remove or reduce the memory (curvature) in the wire. Adjust
the rollers to allow for straightening without restricting movement.
