Carpenter MFG. Co., Inc. Compu-Strip 93 Скачать руководство пользователя страница 3

Страница: 3 / 49

CARPENTER MODEL 93 COMPU-STRIP

Phone: 315-682-9176 Fax: 315-682-9160

Page

Revised 08/23/13 Website: www.carpentermfg.com E-mail: [email protected]

CARPENTER MODEL 93 COMPU-STRIP

INTRODUCTION

Thank you for choosing Carpenter Mfg. Co. Inc. Wire Processing Equipment.

For over 50 years Carpenter has been a leader in

Wire Processing Technology and Service.

Our desire has always been to bring you reliable products.

We look forward to a long healthy relationship with you and our company.

The Model 93 can process a wide range of cables as referenced on the following page.

These stripping specifications are based upon the

most commonly manufactured cables.

Special applications may arise with cables that are

within the specification limits of the machine but are very difficult

or unsuccessful to strip.

Likewise, cables that exceed the specified limits

of the machine can sometimes be processed.

Because there are many variables involved in Wire Processing

we strongly recommend a free Wire Evaluation at our factory

followed by a demonstration from a Carpenter representative

to insure the ultimate success of your Wire Processing Application.

This operating manual explains how to operate

the Model 93 as well as some troubleshooting tips.

To ensure the best performance of your machine,

read this manual carefully until you familiarize yourself

thoroughly with its operation and features.

After you have read through the manual, keep it available for reference.

Use this manual as a quick and handy reference

tool for clarifying any questions that may arise.

If you have any questions about this

machine or service please let us know.

Our phone number is 315.682.9176, fax number 315.682.9160.

Carefully unpack the Carpenter Model 93.

We recommend that you keep the original box and packaging

as it will protect the machine for future transportation if necessary.

Содержание Compu-Strip 93


















































Результаты поиска

Содержание Compu-Strip 93

Отзывы:

Carpenter MFG. Co., Inc. Compu-Strip 93, Руководство оператора, Страница: 3 / 49

Результаты поиска

Содержание Compu-Strip 93

Отзывы: