Carpenter MFG. Co., Inc. Compu-Strip 93 Скачать руководство пользователя

Страница: 49 / 49

CARPENTER MODEL 93 COMPU-STRIP

Phone: 315-682-9176 Fax: 315-682-9160

Page

Revised 08/23/13 Website: www.carpentermfg.com E-mail: [email protected]

CARPENTER MODEL 93 COMPU-STRIP

WARRANTY

Carpenter Mfg. Co., Inc. manufactures its products to be free from defects in materials and workmanship. Should

any defect occur within 1 year after shipment, Carpenter Mfg. Co., Inc. will at its option, exchange or repair the

defective

device.

Repairs or adjustments to equipment under warranty can be performed at our factory or at the customer location,

at the option of Carpenter Mfg. Co., Inc. In most cases a 1-2 day turn around time will be necessary to repair

equipment at our facility. When equipment is returned to our factory for repair or replacement, freight charges will

be borne by the customer. Repaired or replaced equipment will be returned at Carpenter’s expense via U.P.S.

ground service. If alternate shipping is requested by the customer, the difference in shipping charges will be

billed to the customer.

This is a limited warranty and is in lieu of all other representations and expressed and implied warranties

(including the implied warranties of merchantability and fitness for use.) Under no circumstances shall

Carpenter Mfg. Co., Inc. be liable for any incidental or consequential property damages or losses

subsequent to misuse or improper maintenance of this equipment.

NOT COVERED BY THIS WARRANTY ARE:



Consumable parts (blades, belts, guides, springs, inserts, stripping wheels, etc.).



Cosmetic problems (nicks, scratches, etc.).



Damages caused by any repairs or modifications by unauthorized personnel.



Abuse.



Damage caused by shipping.



Damage caused by environmental and/or atmospheric conditions.



Damage caused by the use of contaminated compressed air.

Содержание Compu-Strip 93


















































Результаты поиска

Содержание Compu-Strip 93

Отзывы:

Похожие инструкции для Compu-Strip 93

Бренды по названию

Популярные бренды

Carpenter MFG. Co., Inc. Compu-Strip 93, Руководство оператора

Результаты поиска

Содержание Compu-Strip 93

Отзывы:

Похожие инструкции для Compu-Strip 93

Бренды по названию

Популярные бренды