Cantel Medical MEDIVATOR DSD EDGE, Руководство пользователя

Страница: 8 / 82

8 |
MOVING THE REPROCESSOR
Before moving the DSD EDGE™ Reprocessor, ensure the electrical cord, drain line and water supply line are either
disconnected or are appropriate lengths to accommodate the relocation of the machine. Failure to do so may result
in damage to the machine.
Before moving, the leveling feet must be raised to place the unit on the wheels. Once back into position, the leveling
feet must be lowered.
While moving the reprocessor, ensure the machine remains in an upright position. Moving or resting the machine in
any orientation other than an upright position may result in damage to the machine.
Take precautions to ensure the machine does not tip over which could result in damage to the machine or personal
injury. For longer distances, the machine may be placed upon a dolly or pallet. When loading or unloading the
machine on or off a dolly or pallet, utilize appropriate lifting equipment or manpower to avoid damage to the machine
or personal injury.
If there is any possibility of the machine being jolted during a move, remove the drain manifold to prevent damage to
the manifold or basin.
Note: To avoid injury or death from an electrical insulation breakdown within the unit,
the GFI (ground fault interrupter) circuit breaker should be checked for proper operation
on an annual basis.
Note: If during the use of this equipment you see or smell smoke, immediately disconnect
the unit from the power supply, discontinue use and call Medivators Technical Support at
1-800-444-4729.
Note: Prior to undertaking any service or maintenance operation, or when resetting the GFI,
ensure that the reprocessor is disconnected from the main power supply.
Note: If service or maintenance operations are to be conducted on the water system,
ensure that the reprocessor is isolated from the main water supply.
Caution! The reprocessor does not have an on/off switch. Be sure the reprocessor is
positioned so that the power cord or main circuit breaker is accessible at all times.
Warning! The reprocessor must be protectively grounded.