Canon iPF750 - imagePROGRAF Color Inkjet Printer, Руководство пользователя

Страница: 630 / 742

Adjusting the feed amount
Automatic Banding Adjustment (Adj. Quality)
If printed images are affected by banding in different colors across the sheet, execute Adj. Quality for automatic
adjustment of the paper feed amount.
There are two modes of automatic adjustment to correct banding: Auto(GenuinePpr) and Auto(OtherPaper) .
In either mode, the printer prints and reads a test pattern for automatic adjustment of the feed amount.
•
Auto(GenuinePpr)
Use this mode with paper identied in the Paper Reference Guide.
(→P.95)
•
Auto(OtherPaper)
Use this mode with paper not in the Paper Reference Guide, or if Auto(GenuinePpr) does not eliminate
banding.
(→P.95)
Note
•
Always check the Adj. Priority values before using Auto(GenuinePpr) or Auto(OtherPaper) .
(→P.613)
•
Adjustment is not possible with Auto(GenuinePpr) and Auto(OtherPaper) when using highly
transparent media.
In this case, use
Manual adjustment.
(→P.616)
•
If additional ne-tuning is necessary after Auto(GenuinePpr) and Auto(OtherPaper) , execute Adj.
Fine Feed .
(→P.618)
•
Use Adjust Length to ensure that lines in CAD drawings are printed at exactly the right length.
(→P.619)
•
This may take some time, depending on the type of paper.
•
Use paper of the same type and size for adjustment as you will use for printing.
Paper to Prepare
Rolls An unused roll at least 10 inches wide
Sheets Auto(GenuinePpr) : One sheet of unused paper of at least A4/Letter size
Auto(OtherPaper) : Two sheets of unused paper of at least A4/Letter size (or one
sheet when using A2 or larger)
Perform adjustment as follows.
1.
Load the paper.
•
Attaching the Roll Holder to Rolls (→P.103)
•
Loading Rolls in the Printer (→P.106)
•
Loading Sheets in the Printer (→P.136)
Note
•
Always make sure the loaded paper matches the type of paper specied. Adjustment cannot be
completed correctly unless the loaded paper matches the settings.
614 Adjustments for Better Print Quality