Canon image Prograf iPF780 Series, Руководство по обслуживанию

Страница: 202 / 326

Chapter 6
6-15
Ink tank error.
Press OK and replace ink tank. 03830206-2547 MBK2 ink tank ID error Replace with a valid MBK ink tank.
Ink tank error.
Press OK and replace ink tank. 03830207-254A R ink tank ID error Replace with a valid R ink tank.
Ink tank error.
Press OK and replace ink tank. 03830208-254C G ink tank ID error Replace with a valid G ink tank.
Ink tank error.
Press OK and replace ink tank. 03830209-254B B ink tank ID error Replace with a valid B ink tank.
Ink tank error.
Press OK and replace ink tank. 03830212-2544 PM ink tank ID error Replace with a valid PM ink tank.
Ink tank error.
Press OK and replace ink tank. 03830213-2545 PC ink tank ID error Replace with a valid PC ink tank.
Ink tank error.
Press OK and replace ink tank. 03830215-2549 PGY ink tank ID error Replace with a valid PGY ink tank.
Maintenance cartridge full.
Replace the maintenance cartridge. 03841001-2819 Maintenance cartridge full Renew the maintenance cartridge.
No Maintenance Cartridge capacity.
Replace the maintenance cartridge. 03841001-281B Not enough space in the maintenance
cartridge prior to cleaning Replace the maintenance cartridge.
No maintenance cartridge.
Check the maintenance cartridge. 03841101-2818 Maintenance cartridge not installed. Install the maintenance cartridge.
Maintenance cartridge problem.
Replace the maintenance cartridge. 03841201-2816 Maintenance cartridge EEPROM error Renew the maintenance cartridge.
Maintenance cartridge problem.
Replace the maintenance cartridge. 03841201-2817 Maintenance cartridge ID error Renew the maintenance cartridge.
Push paper a little 03860001-2E06 Waiting for manual feed paper to be
inserted. Push the cut sheet a little.
Manual printing is selected, but a roll is
loaded.
Press Load/Eject and remove the roll. 03860001-2E0C Data with a cut sheet specification has been
received when roll media are loaded. Load cut sheets at the paper tray port.
Top paper feed slot is selected.
Press OK and load a sheet.
03860002-2E02 Data with a cut sheet specification has been
received but no cut sheets are loaded. Load cut sheets at the paper tray port.
Sheet printing is selected.
Press Load/Eject and load sheets. 03860002-2E05 Manual feed paper setting job has been
received, but no manual feed paper is
loaded. Load cut sheet in the manual feed paper slot.
Remove the cut sheets. 03860002-2E07 Waiting for manual feed paper to be
removed. Remove the cut sheet.
Roll printing is selected, but sheets are
loaded.
Press OK, remove the sheets, and load a
roll. 03860002-2E0A Data with a roll media specification has
been received when a cut sheet tray is
loaded. Replace with roll media.
This type of media is not
compatible with HP-GL/2. 03860006-2825 Paper type mismatch at HP-GL/2 printing Exchange for the compatible paper to HP-GL/2 before
reprinting.
! Cannot print as selected.
Another roll is in use.
Stop: Stop Printing
03860007-2E40 Lower roll data has been received when
there is print in the upper roll. Press the Stop button to delete the print job.
! Cannot print as selected.
Another roll is in use.
Stop: Stop Printing
03860007-2E41 Lower roll data has been received when
there is print in the lower roll. Press the Stop button to delete the print job.
Borderless printng not possible.
Check roll position.
Online: Print
Load/Eject: Change Paper 03861001-2405 Paper loaded at a position inaccessible for
borderless printing Check to see if a borderless printing spacer is installed.
Reload the paper.
Borderless printng not possible.
Check paper size setting. 03861001-2406 Data unfit for borderless printing Check the data, and then print again.
Borderless printng not possible.
Paper stretched or shrank.
Confirm usage cond. of the paper. 03861001-2407 Borderless printing disabled (engine
detection) Reload the paper.
Borderless printng not possible.
Check supported paper. 03861001-2408 Borderless printing disabled (unsupported
size) Check the media size.
Insufficient paper for job
Online: Print
Stop: Stop Printing
Load/Eject: Change Paper 03862000-2E09 Not enough roll media on remaining roll
media quantity detection Renew the supply of roll media.
Insufficient paper for job 03862001-2E31 Not enough roll media Renew the supply of roll media.
Insufficient paper for job 03862002-2E32 Not enough roll media (lower roll) Renew the supply of roll media.
Cannot adjust printhead.
Press Online to clear the error and
readjust printhead. 03863000-2820 Printhead registration unadjustable Check the paper on which a pattern is printed for smears.
Check the environment for interferences from outside
light.
Clean the printhead.
Cannot adjust printhead.
Press Online to clear the error and
readjust printhead. 03863000-2821 LF unadjustable Check the paper on which a pattern is printed for smears.
Check the environment for interferences from outside
light.
Clean the printhead.
Cannot adjust eccentric.
Press Online to clear the error. 03863000-2822 Eccentricity correction disabled Check to see if paper has not jammed.
Display message Code* Condition detected Action