Canon image Prograf iPF780 Series, Руководство по обслуживанию

Страница: 121 / 326

Chapter 3
3-3
b. Moving the printer on floor where there is difference in grade or transporting by truck
When transporting in the low temperature environment, refer to "c. Transporting by plane or ship or others or transporting in low temperature environment such as
below freezing".
If the ink remains in the printer when transporting the printer, it can cause damage to the printer by the freeze of ink.
Transportation procedure
1) Remove the paper and roll holder.
2) Select [Set/Adj. Menu] > [Prep.MovePrinter] > [Limited].
3) Press the [OK] key and perform transportation mode.
4) When the message completed the transportation mode appears, turn off the power, and remove the power cord and interface cable and check that the heads are
capped and carriage is locked.
5) Attach the cushioning materials and tape.
6) Unlock the casters on the stand, and then move the printer slowly by holding the carrying handles at the bottom.
If the printer is subjected to strong vibrations when it is moved, it can cause ink leakage or damage to the print head. Be sure to move the printer slowly and carefully.
Item Description
[Prep. MovePrinter] on the Main menu Perform [Limited].
Allowed tilting angle
Lengthwise: -30 to +30 degrees
Rotation: -30 to +30 degrees
Ink consumption Approximately 130 to 580ml of ink is consumed according to the ink remaining level in the subtank.
At this time, if the ink tank unit detects the state that the ink in any subtank is empty, ink drainage from all
ink passage of its ink tank unit is executed.
- The amount of ink consumption when the ink drainage from either ink tank unit is executed: approximately
360g
- The amount of ink consumption when the ink drainage from two ink tank units is executed: approximately
580g
Ink drainage area Subtank
However, if the ink tank unit detects the state that the ink in any subtank is empty when performing this
mode, ink drainage from all ink passage of its ink tank unit is executed.
Ink tank Install.
Separation of printer and stand They do not need to be separated.
Maintenance cartridge Install.
There is no need to open a new maintenance cartridge.
However, if there is a message instructing to replace the maintenance cartridge or check the remaining ink,
replace with new maintenance cartridge before transporting.
Replacement of consumable parts There is no need to replace consumable parts.
Service support No service support is necessary.