Appendix A: Software Reference 128
P/N 113564 Rev. 2
Twister II Robot User’s Manual
Caliper Life Sciences, Inc.
Teach Tab - Test and Verify Tab
The
Test and Verify
tab is used to test the positions and paths
leading to and from the instrument selected in the
Names
tab.
Figure 98. Test and Verify Tab
Get Plate Button
- Uses the instrument’s Approach path, Pick
positions, and Clear path to remove a material from the instrument
selected in the Names tab. If the instrument has more than one
material position, the Plate Location window (see
) opens
to specify the position where you want to get the plate.
Put Plate Button
- Uses the instrument’s Approach path, Place
positions, and Clear path to place a material into the instrument
selected in the Names tab. If the instrument has more than one
material position, the Plate Location window (see
) opens
to specify the position where you want to place the plate.
