CAE Healthcare Fidelis Lucina, Руководство пользователя

Страница: 373 / 390

Wireless Voice Link
345
Battery Capacity Indicator
The red power light flashes one time every second when the battery capacity is good. When the battery
capacity is nearly depleted, the red power LED flashes twice in quick succession every second. This
indicates the batteries need to be replaced.
To get the most battery life out of the handset, the handset should be powered down when it is not in
use.
Troubleshooting
CAE Healthcare Customer Service is available to help with iStan problems, should they arise. However,
sometimes you can speed up the customer service process by performing diagnostics before calling,
and eliminating some problems on your own with the help of the following instructions.
Power Problems
The red power light on the handset does not flash when power switch is turned on.
• Check that the batteries are inserted correctly. Install a fresh set of
batteries, if needed.
The red power light on my base station is not flashing when the simulator is powered on.
• Check that the cables from the simulator are installed in the base station
correctly.
Audio Problems
The sound output from the simulator is low when using a microphone on my lapel.
• Increase the microphone gain on the handset by moving the dial towards
the plus sign. DIP switch 7 must be in the OFF position for this to work.
I’m hearing feedback from the microphone when I am close to the simulator.
• Decrease the microphone gain on the handset by moving the dial towards
the minus sign. DIP switch 7 must be in the OFF position for this to work.
The sound output from the simulator is too high or too low.
• The volume level is configured at the factory for optimal performance.
However, if you want to adjust the volume level of the base station (located
inside the simulator), set the handset DIP switch 7 to ON. Remember to
turn the handset power off and on after each DIP-switch change. After this
step is complete, you will be able to adjust the volume level of the base
station by adjusting the handset volume dial.