CAE Healthcare Fidelis Lucina, Руководство пользователя

Страница: 371 / 390

Wireless Voice Link
343
If you have 13 to 20 simulators in the same vicinity, set all of the WVL pairs to use channel 12 of RF
Channel Group 2. To give unique initial RF frequencies, assign each WVL pair to its own RF channel with
the settings found in CH 12 through CH 31.
RF Channel Selection Methods
For a complete list of the initial frequencies associated with the RF Channels, see RF Channel Initial
Operating Frequencies.
Powering Up the WVL Pair
To power up the WVL pair:
Power on the base station by turning on the simulator. The base station power switch is in the on
position by default.
Power on the handset by setting the power switch to the on position.
The red power light on each unit blinks when the unit is on. Once both units are powered on and
communicating with each other, the green connection light flashes once every second.
If the green connection light fails to blink, ensure both units are set to the same RF channel.
If you make changes to the DIP switch settings, toggle the power switches of the handset and base
station off and back on to ensure the changes takes effect.
Using the iPhone/Standalone Microphone
DIP switch position 6 on the handset determines if the iPhone microphone input or the standalone
microphone input is enabled. When DIP switch position 6 is set to the OFF position, the standalone